Occasionally know that there is such a luxury version of Android DLP projector, to do the test today.
Do not talk about the Android system, talk about Android hardware, talk about network speed.
Attached to Jingdong's link, the official propaganda is television, home HD projector, home theater. The focus should be on projection effects, sound effects, and ease of use.
Zero, packaging
Product names, telephones, websites, and companies on shipping packages
Approximate size
The inner six sides are all bubble cushions. It is no problem to prevent bumps.
Mango inside, content provided by the mango, does not mean anything for Android, you can install XBMC.
There are product labels underneath and partners include Harman Kardon (sound), mango (video content), and Baidu music (audio content).
Remove the lid is the main body, and squarely looking.
There is a drawer under the main body. The drawer is the power supply, remote control and instructions.
壹, appearance
Touch buttons for operating speakers without screen
Speaker in the bottom of the fuselage
This picture... obviously rotates over
The back interface is sufficient, two HDMI, two USB, one fiber RJ45, one 3.5 audio port. There are also cooling vents.
è´°, performance parameters
There are mainly these points:
1, DLP projection
DLP projection of the principle and advantages and disadvantages are not detailed, you can go to Wikipedia look in detail.
Dimi's DLP is said to use Qualcomm's technology, 900 Ansi, which is equivalent to 3750 lumens, and no specific technology has been found. The real experience is shown later.
(T1 and T2 brightness is 3600 Ansi lumens and 14400 Ansi lumens, in order to truly ignore the sunlight indoors, but huge expensive)
Built-in intelligent light sensing function, with the ability to sense the surrounding ambient light measurement, through the calculation of the intelligent illumination control system, automatically adjust the brightness and contrast of the projection screen to an optimal state, and play a role in alleviating eye fatigue.
2, 1080P & 10000: 1 contrast ratio
This is very important, the effect of the projection is clear, and the viewing sensation finally becomes better. With 1080P as the threshold, the projector can be truly used in home theaters.
3, projection parameters
Screen aspect ratio: 16:9 (fits most modern film source ratios)
Projection ratio: 1.39 - 1.5: 1 (related to the focal length, this number is the ordinary focal length)
Color>=120% NTSC (Deciding screen color reproduction)
Projection: front projection / rear projection / ceiling (support a variety of installation methods, can play flowers at home)
Keystone Correction: Vertical: ±35 degrees: ±30 degrees (adjustable)
Adjustment function: electric focusing (in the ordinary focal length of the electric focus is a more luxurious configuration, but think about it 5000 price is also still expected, the use of electric focus is much easier to use, can meet with holding the projector everywhere The need to run, unfortunately it is not automatic focusing )
Wireless projection function (Miracast is built-in on the machine, but I did not try it with XT1052 and XT1254. I used a Microsoft wireless camera with the test input)
Miracast doesn't respond
Supports input terminals HDMI2.0 ×2, USB 3.0 ×1, USB 2.0 × 1 output terminals SPDIF × 1, HDMI ARC × 1 (shared with HDMI2), headphones × 1
Full HD 3D (a more practical feature, supported by high frame rate DLP technology, with shutter glasses can see 3D)
4, speaker
Harman Karton
Not much to introduce, according to the sound of the Sony AKG, Motorola JBL, I heard the sound of the ear sounds good, but the big-name speakers are confined to such a small space, want to listen to good music depends on faith.
A big wave of video has come and can be viewed selectively
1, the initial boot, failed
The reason for the failure is that the bluetooth remote control is inexplicably disconnected. In order to complete the experience, I will shut down again. In the video, you can see that the focus is periodically changed during the first boot. I judge that it is not necessary to read the manual for the first time to make sure that the guide text on the screen can be seen in most cases.
In the following video, I can also feel that the rice is very difficult to design in the guidance and human-computer interaction, and it is very comfortable to use.
2, the second boot, successful
After the second boot I connected successfully and celebrated.
After you enter, you can choose to connect wireless, login account and the like. I didn't bother to do it all.
(Its signal source waits for the page to be nostalgic. We can guess the age of the product manager: A, 30-35, B, 35-37, C, 37-40)
3, switch machine method
It can also be found on the JD.com product page. This is the product highlight of the promotion. The switch and lens cover are combined into one. In addition, H1 uses an LED light source and has a quick-shutdown technique. When the lens cover is closed, the light source is immediately turned off. Under normal circumstances, the cooling fan stops immediately.
4, wireless speaker
There is actually a layer of membrane in the operating area of ​​the speaker. I have not peeled off the operating instructions above. When the press button is pressed, the whole machine starts up except for the projection part. No screen will automatically connect Baidu music to get songs, random play.
Operation feel is not too good, not so sensitive. But the advantage is that the surface is hard-wearing, leaving no trace.
For the WIFI speaker, I edited it again and couldn't help but quit.
The device supports DLNA. I tried it with Netease Cloud Music. The push is no problem. The problem is that after opening the WiFi speaker with the remote control, the mobile phone pushes DLNA, and the wifi speaker's own audio still does not stop! ! This mistake can be committed!
In addition, when the DLNA is connected, the volume of the mobile phone is used to directly control the volume of the WiFi speaker. When there is a bug in the control, whether it is increasing or decreasing, the WiFi speaker will slam to the maximum volume . XT1254 was used in the test, which does not exclude the normal working model.
It is written, and tried a big BUG, ​​when using DLNA to push music, because it's own audio source was stopped by me, it defaulted to standby mode, probably shut down automatically after 10 minutes !
5, daytime projection effect
I am very sure to tell you that the night is very good, and it is no different from a 1080p high-definition display, which is even better than an ordinary large-size TV. I mainly measured the effect of the day, with the phone meter software.
Two or three in the afternoon, south to the window, oblique. The number of lumens facing the outside of the sensor is about 1000, the lumen number of the projector is about 500, and the number of reflective light on the wall is about 300. I did not test with a pure white screen, meaning nothing.
6, pull the curtain effect during the day
Curtains are ordinary curtains, transparent. After the curtains were pulled, the number of window lumens dropped to around 600, and the projector did not change. My visual effect is better than opening curtains.
This is a photo, the effect of pulling curtains.
7, remote control function - focus
As mentioned earlier, it has done a great deal of interaction. There are quite a few features integrated on the remote control.
This is the electronic focus function used to move the projector.
8, remote control function - voice control
The idea of ​​voice control is good, but recognition may be limited by content. The experience is not ideal. better than nothing.
9, remote control function - 3D mouse
Using the remote control as a function of the air mouse is a small idea. Serve a small audience.
10, remote control function - body
I did not test this, to install the game, look at the game content do not want to play. You come to bite me~
Look at the description, similar to the 3D mouse, the former is to simulate the remote control as a pointing stick, the latter is to simulate the remote control into a physical stick
11, Resource Manager & 3D Source Test
Nothing to see, there is 10G storage space. Supports 3D display. However, the standard version does not send glasses, want to see 3D film source need to buy glasses.
The player operation is smooth, this should be the credit for the Android board, fast forward is very smooth.
12, instructions
Contains electronic instructions, more detailed than paper instructions, interested can see. Before turning it on, adjust the volume slightly lower and there is noise.
Oh, use feelings 1, a penny goods
When home projectors use DLP and electronic focusing, the experience has improved a lot. However, I feel a little loss, because the small stereo, free content, and the Android system that caused the premium may not be used by myself. I would like to spend more money on Epson's more than 5,000 engineering machines and have great cinematic effects.
The APP does a good job, can push content, install software, remote control, mouse control, somatosensory control, voice control.
Easy to install Chrome, followed by Word, Excel, PowerPoint, XBMC
I do not know this Android system counts my display device as a few inches...
The program can be installed remotely, most programs can be found
XBMC (or open source)
2. Still need to continue efforts
It has been able to easily meet the needs of the average family, not just for temporary rental users. However, there are still some problems:
U disk can be read, some MKV can be put, some MP4 can not put. Android system problems, individuals can install MX play and then install a third-party decoder, but the official can be settled.
The style of WIFI speaker songs is young and cannot be selected and customized. This level of projector should be more widely targeted to the audience.
WiFi speaker control part did not care .
The lens cover turns on automatically and turns off automatically. Shutdown speed is very fast, but after using the remote control to shut down, closing the lens cover will lead to boot, you need to open the lid and then close; wifi speaker after opening the lid and then shut down, there is no other shutdown method (such as long press); plug in the power automatically start, Opening the lid will shut down, need to close again before opening. These three points I see appear in this version is a bit confusing on the logic of the switch, the problem is not great, affect the experience.
PS, note XBMC or KODI support Chinese, but the direct tune will be garbled, to set up two parts.
After entering XBMC, System-Settings-Appearance-Skin-Fonts is set to Arial based. This has the basis for changing Chinese.
Then don't set the Setting menu. In the International-Language set to Chinese (Simple). After the change, the Region below will become "Region", set to Beijing (12h) or Beijing (24h).
I think I write again
Phone Holder,Phone Holder For Mobile Phone,Car Air Vent Phone Holder,Mobile Phone Holder
Shenzhen ChengRong Technology Co.,Ltd. , https://www.chengrongtech.com