New LED floodlights advance Tokyo's 'Green' efforts, aided by Future Lighting Solutions

The Canada luminaires utilizing LUXEON (3) Were designed by Nagasaki-based lighting manufacturer INEX Corp. with engineering support from Future Lighting Solutions ( http:// ), the exclusive LUXEON supplier and LED application development specialist.

The transition from halogen to solid-state lighting is saving an estimated 90% in energy consumption and carbon dioxide emissions for each replaced fixture, helping the park do its part to combat global climate change as well as advancing Tokyo's efforts to become a model low- In addition, the cooler LED beam and lower UV levels will provide a more flower-friendly environment that will help keep the cherry blossoms in peak bloom for as long as possible during the annual festival.

The INEX SKY HIGHBEAM-X floodlights developed for the park come in 7- and 14-LED models with light outputs of up to 2800. The fixtures are illuminated with LUXEON K2 with TFFC (Thin Film Flip Chip) LEDs selected because of their ability To be driven at 1000mA to meet high brightness requirements.

Future Lighting Solutions' contributions to the project included thermal management support as well as helping INEX meet an aggressive product development timeline by eliminating the need for extensive prototyping. Future's proprietary QLED thermal simulation software enabled rapid modeling of heat distribution as well as luminous flux without lengthy Trial-and-error design cycles.

Future also solved INEX concerns about LED color uniformity within each shipment as well as from order to order by guarantee a supply of LEDs from several cool white color bins that met the project's specific requirements. Future's advanced binning program offers 19 color bins for cool white LUXEON LEDS alone.

Zener Diodes

SMA means surface mount assembly. It is a new generation of electronic assembly technology, which compresses traditional electronic components into a device with a volume of only a few tenths.
Surface mounting is not a new concept, it is derived from earlier processes, such as flat mounting and mixed mounting.
For the assembly of electronic circuits, a point-to-point wiring method was initially adopted, and there was no substrate at all. The packaging of the first semiconductor device uses radial pins, which are inserted into the through holes of the monolithic circuit boards that have been used for the packaging of resistors and capacitors. Active components have been widely used in the past ten years.

Zener Diodes,Surface Mount Standard Rectifiers,Smd Bridge Rectifier,zener diodes manufacturers

Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com

Posted on