What if the WiFi signal on the network set-top box is not good?

The network set-top box wireless signal is sometimes not very good, which can affect the viewing experience, so enhancing his wifi capabilities is imperative!



With regard to the solution for enhancing wireless signals, the following are summarized:

Change signal channel

When using a wireless router, the router usually has a default channel, perhaps the most congested one. The same effect can be achieved by changing the channel in the router settings or by using the free tooling software inSSIDer. Don't be fooled by the seemingly complicated graphics, just switch to less crowded channels.

2. Update the router's firmware

Home users tend to overlook the fact that updating router firmware is often the easiest way to go because business routers often have notifications for firmware updates, but not for home products. In fact, the new version of the firmware tends to improve on signals, performance, etc. so you can try using the “Check for version updates” feature in the router setup screen.

3. Update wireless network card driver

In addition to updating the firmware of the router in time, the update of the network card firmware of the computer is equally important, and in some cases it will also improve the ability of the computer's WIFI signal search. Most laptops have built-in wireless network adapters. Just enter the control panel to find the name of the network adapter, and then go to the official website to download the latest driver installation.

4. Change the location of the router

Normally, we will place the wireless router closest to the broadband modem, but in fact, the best location is in the middle of the entire house. Of course, depending on the size of your house, if you are only a one-bedroom apartment, it may not be much different where wireless routers are placed; if it is a three-bedroom, two-room, large-scale duplex house, then Wireless routers should be placed in the center of the house as much as possible to bring good wireless signals to the second floor space. The entire cost is actually very low. If you are far from the width of the modem, you can buy a longer Ethernet CAT 5 cable.

5. Install DD-WRT open source firmware

DD-WRT is a well-known router open source firmware, similar to the custom firmware in the smart phone field, which can usually maximize the performance of the wireless router and add more functions. Of course, not every router supports DD-WRT firmware. For details, you can log in to the DD-WRT website. In addition, since the firmware is in an open source custom form, the router will lose its official warranty after installation. Therefore, it is recommended that you select DD-WRT firmware after the warranty period to improve performance.

Grooved Pipe Fittings are the part that plays the role of connecting, reducing, turning and branching in the pipe system. The pipe used for the connection of the fire-fighting pipe is the fire-fighting pipe.

Material: Ductile Iron Casting, conforming to ASTM A536 65-45-12 Equal to QT450-12.

Coating: 1.Painting  2.Epoxy  3.Dacromet  4.Galvanized

Colour: 1.Red  2.Blue  3.White  4.Orange

grooved elbows

grooved tee,cross and reducer

grooved flange adaptor

grooved flanges







Grooved Pipe Fittings

Grooved Pipe Fittings,Ductile Iron Fittings,Ductile Iron Flange,Ductile Iron Grooved Fittings

HEBEI ZIFENG NEW ENERGY TECHNOLOGY CO.,LTD. , https://www.zifengpipeline.com

Posted on