Beijing Materials Institute LED screen and voice lab transformation server equipment tender

Entrusted by Beijing Materials College, China National Electronics Import and Export Corporation conducted a domestic public bidding for the government procurement project of the Auditory Facilities, LED electronic display and voice laboratory transformation server storage equipment of Beijing Materials College. A qualified bidder is invited to come to the bid.

I. Project Name: Auditorium Facilities, LED Electronic Display and Voice Lab Renovation Server Storage Equipment Government Procurement Project of Beijing Materials College

Second, the tender number: 0714-EMTC-2869

Third, the content of the tender: (name, quantity, etc., if there is any error in the bidding documents, the bidding documents shall prevail)

Package number of goods name quantity subcontract control amount (ten thousand yuan)
Remarks
01
Auditorium seating
1200 sets
84
For specific requirements, the items and quantities included in each package can be found in Chapter 8 of the bidding documents.
02
Auditorium lighting and sound equipment

280
03
LED electronic display

106.5
04
Voice lab transformation server storage device
1 set / set
30 . 244


4. Qualified bidders

1. Domestic suppliers registered in the territory of the People's Republic of China who are able to independently bear civil liability and have production or supply capabilities, including legal persons, other organizations, natural persons and their consortiums.

2. Comply with relevant national laws, regulations, rules and regulations related to Beijing government procurement, and have a good business reputation and a sound financial accounting system.

3. The bidder must purchase the bidding documents from the tenderer and register and file the case. The potential bidders who have not purchased the bidding documents from the tenderer and registered for the record are not eligible to participate in the bidding.

4. Bidders who invest in 01 packages must have second-class capital (including secondary) of performing arts equipment, and have the technical qualification of audio society.

V. Time and place of purchase of bidding documents:

1. Time: From April 25, 2008 to May 14, 2008, 9:00 to 11:30 am; 13:00 to 17:00 (Beijing time). (except for national holidays);

2. Location: China Electronics Import and Export Corporation (Electronic Building, No. 23, Fuxing Road, Beijing, Room 1217, Back of Urban and Rural Trade Center).

Price of bidding documents: RMB 500 yuan / book (electronic document download address: China Education Equipment Network click on the "Tender Notice" column, enter the new page and then click on the "Stamp Download" column.), tender The document is not refundable after sale. For mail order, an EMS fee of 100 yuan must be added. Please send the money at the following address. The remittance slip should indicate the purpose of the remittance, the bidding document number purchased, the package number, and then fax the copy of the remittance slip, the name of the purchaser, the detailed mailing address, telephone, fax and contact person. Our company, after receiving the fax, our company will mail the bidding documents to you by EMS as soon as possible.

3. Other:

3.1 The bidder may bid for all the goods listed in the “List of Goods Needs List” in the bidding documents, or may only bid for one or several packages of goods, but the contents of one package shall not be opened for bidding.

3.2 The project is scheduled to be arranged on May 9th, 2008 at 9:00-11:30 am to place bidders to the auditorium of Beijing Materials College for on-site investigation. Only this time period is scheduled to be visited in advance or late. Contact number, contact person: Teacher Yan Ping.

6. Deadline for bid submission and time and place for bid opening:

1. Deadline for bid submission and time for bid opening: 9:30 am (Beijing time) on May 16, 2008

2. Bid Opening Location: China Electronics Import and Export Corporation

Seven, other:

1. The bid documents should be submitted to the bid opening place on the day of bid opening (before the bid deadline). Documents submitted after the deadline will not be accepted.

2. At that time, bidders are required to send representatives to participate in the opening ceremony.

Eight. Scoring method: comprehensive scoring method, evaluation factors:

(1) Technical performance: 40 points, comprehensive consideration of the configuration and performance of the bidding products;

(2) Relevant performance: 5 points, considering the performance of the project that the bidder has done in the past 3 years, which is the same or similar to the project;

(3) Comprehensive business: 25 points, including 5 points for supply plan, 5 points for after-sales service measures, 5 points for credit and credit;

(4) Bidding price: 30 points.

Price sub-calculation method: The bid price that meets the requirements of the bidding documents and has the lowest bid price is the benchmark price for bid evaluation, and the price is divided into full marks. Bidding quotation score of other bidders = (bid evaluation base price / bid quotation) × 30%

Tendering Agency: China National Electronics Import and Export Corporation Address: Electronic Building, No. 23, Fuxing Road, Beijing (back of Urban and Rural Trade Center)
Zip code: 100036

Bank of deposit: Bank of China Head Office Sales Department Account Number: 00166108094001
Contact: Zhang Wei

Contact Phone: 010-68218506 010-68296352
Fax: 010-68221474

Solder Cup D-Sub Connectors

Antenk D-Sub,D-Shaped Connectors Solutions offer a broad range of higher reliability D-Sub connectors.

Antenk's D-Sub product line is designed for applications that require a rugged, robust I/O connector system with various styles and mounting options. All are used in a variety of industries including computer, industrial, medical, and military markets.

Antenk High-Density D-Sub Connectors
Available in cable mount options including crimp & solder cup and the board mount options including Dip Solder, Wire Wrap, High Profile, Right Angle, & Surface Mount (SMT). This comprehensive Antenk High-Density Density D-Sub product offering is available in both stamped & formed and machined contact options.
High density D-Sub connectors, for applications where the best possible contact density is required. Due to the [high" density of the 15, 26, 44, 62 and 78 contacts, this series is ideal for the most modern applications. The insulating body, a monoblock, complies with the UL94 V-0 standard. The contacts are machined and available in several quality classes.

Antenk Solder Type D-Sub Connector

Available in standard and high density versions

Supplied with stamped & formed or screw machine contacts.

Standard contact terminations accomodate up to 20 AWG standard wire

Available with white (nylon) or black (PBT) insulators. Standard shell plating is tin

Antenk D-Sub connectors solder cup machined contacts are manufactured according to the standards MIL-C-24308 and DIN 41652. The standard connectors from Antenk are available in all known versions and sizes. They are available in various version with numerous assemblies. The insulating body, a monoblock, complies with the UL94 V-0 standard. The contacts are machined and available in several quality classes.

Features of Antenk's Solder Cup Standard D-Sub Connector Machined contacts

Materials of Antenk Solder Cup Standard D-Sub Connector Machined contacts

Materials of Solder Cup High Density D-Sub Machined Contacts

9 pin, 15 pin, 25 pin, 37 pin, 50 pin Male Solder Cup Standard D-Sub Connectors Machined Contacts, Solder Cup High Density D-Sub Machined Contacts,Female Solder Cup Standard D-Sub Connectors Machined Contacts

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com