Q: If you get a fire, what are your three choices?
A: As you can't leave, I leave myself behind.
Q: Are you sure you want to do this?
A: Can we talk about such a sad topic? Isn't it better to share a desktop story?
I highly admire the author of the title "Senior XX Lovers" and "Professional XX Players" before the title. Although many of my hobbies are not perfect, I just seem to have never changed my hobbies, so this time I also ventured into the title of “competent male†as a cow B.
To say that the desktop must first start with the study, when I and the Queen formally moved into their own new home six years ago, the idea for the study was shared by two people. The desktop looks like this.
Can gradually understand the future of the two lives, good ideas, often full of hidden! !
When the Queen was watching the soap opera, I was ordered to turn off the music on the grounds that she could not hear the dialogue!
When the Queen was PPT, I was ordered not to watch video games. The reason was to distract her!
When the Queen was playing the game, I was ordered not to use my own computer and wanted to play with her!
And when I was tempted to buy a slightly fevered headset, I was told to either buy another one for her or check out the small vault immediately!
So now it seems that the personalized desktop must be premised on its own study, and the process in which I strive for “study independence†is exactly what the otaku and the queen are frightened by (dead) heart (leather) action (Lai) é„ (face) History of the fight. One of the twists and turns of the question is not too far from being said. What is gratifying is that I eventually won the deportation of the Queen and her computer, and she began her fever trip.
The following is a picture record of the “territory†construction after I obtained independence. I have also gone through the detour from Jane Shifan.
For us "digital otaku", "desk" is basically not related to the book. Calling the computer desk may be more appropriate, and the study is basically synonymous with the computer room. But this table carried part of my hobbies and dreams, and it became a concern for my family. Today, it coincides with SMZDM's “2016 Original Password First: One Table One World†event. For the sake of gold coins and to commemorate the lives of otaku, I will share my desktop story.
Desktop layout and decoration
accessories
When talking about desktop layouts, you must bring the wall that you are leaning against. A single table full of equipment can only be considered a workstation. With the ornament on the wall to show more personality elements, so we first talk about desktop jewelry.
With this concept, my desktop can be divided into two layers. The lower floor is a digital equipment area, where the left is a display and a keyboard-based operating area, and the space to the right is occupied by numerous digital devices.
The wall above the desktop is a jewelry area set up by paintings and shelves. It contains my favorite three themes: “Star Trek, Iron Man, Gundamâ€.
I spent a long time looking for the right painting to adorn the white wall in front of the monitor. In combination with my favorite Star Trek, I finally decided on this spacecraft exploded picture --------- Star Trek Federation Starship Constitutional Progress number.
The size of 120*60 cm just fills the empty wall. It takes a lot of effort to print and make the photo frame. Thanks to Omnipotent Taobao, it finally solves all problems perfectly. The effect on the wall is as follows:
As my other hobby, the HOTTOYS moveable will definitely take a place on my desktop. Use TOYSBOX closed Ghana to eliminate dust while having a glowing effect.
Although it is not recommended for IKEA large furniture, there are still many good products for his small accessories. The Eckby-Hannis separator is 119x28 cm in size and the pine wood-based solid wood material is strong enough, the price is very cheap, and there are many styles of home to choose from. It is very appropriate to place collections such as puppets in the study.
If the load is heavy, it is recommended to install 3 brackets like me to increase load bearing strength
The Gundam poster on the right is the original version of Bandai brought back from Japan. It has been with me for more than seven years.
At the time, the picture frame was IKEA Riba series, and the style was very satisfactory with color matching.
However, due to the use of a fiber board material, the strength is general, it is prone to moisture, and the body is heavier. It has been slightly deformed after long-term use. If you buy now strongly recommend the new Siqiang than series, aluminum alloy material is more narrower than the border, visual effects and strength are better than the Liba series
light
Just relying on the study ceiling lamp can only meet the basic lighting needs, because the brightness and color temperature are constant so comfort will not be able to talk about. It's especially uncomfortable when dealing with images, so look for suitable light sources.
At present, I use two sets of auxiliary lighting, first of all, the LED lighting of the Iron Man Gallery, which can be used as a temporary auxiliary light source due to its higher brightness. I usually use it when watching movies or playing games.
For the retouching, Mi Jia's desk lamp was used as a lighting assistant. Millet's products always bring a lot of controversy, but I personally feel good about other series than the mobile phone tablet.
The price is cheap, the shape is also very exquisite and compact, the biggest advantage is that the brightness color temperature can be adjusted according to need, it is very suitable for the auxiliary lighting while working. I placed it behind the monitor, mainly using the softly reflected light from the wall to reduce the color difference that the monitor might produce.
Because the position of the desk lamp is not convenient, although the meter home lamp supports wireless control, it is inconvenient to turn on the mobile phone every time. Therefore, the millet intelligent system is controlled by using a one-button switch.
In fact, through the human body sensor and the universal wireless remote controller, I have already set the basic operation of most electrical appliances in the study to the two single-button switches in front of the keyboard. The actual use is very convenient. 
The full lighting effect chart is basically satisfactory.
Desk storage
desk
When we talk about the desktop, we must first have a desk. My desk is derived from the embarrassment of the original “Two Worlds†life. Although the design is not perfect, it also generally meets my fever needs.
Its prototype comes from IKEA and the product name I have forgotten. The first time we purchased furniture, we rushed to IKEA. This computer desk was a style that we saw at a glance. The price is not too expensive, it seems that the full set adds up to 1300 or so, and the bookcases purchased at the time, small cabinets and the like are also very cheap, and more than 8,000 yuan will be home furnishings more than half. At that time, the Swedish capitalists were really big philanthropists!
But when I took a closer look and found out that the main material of all the furniture was a cheap synthetic version, there was paper in the material components of the table and bookcase partitions, which was a bit dizzy at the time. After searching the Internet again, it can only be described as "deeply disturbed." The common sense of "a penny and a piece of goods" is a constant truth all over the world, so the final decision is to return all of them.
However, although IKEA's material was poor, the design was still very much like it. At the time, no experience was found. At the end of the day, the ruler took a sneaky measure and drew a sketch for a long time. Then he searched for the custom-made wood furniture store and finally tossed out such a thing. .
At the time, my heart was in a state of collapse. Although it was roughly the same as I expected, I always felt something was missing. . The rounded corner-edged desktop of the manufacturers adds a touch of simplicity to the design. The ugly and dreaded drawer handle made me full of the desire to return. The delivery and installation master, who could face a cross-section of meat, pressed me hard. . Even if your own custom-made table has tears, it will take a lifetime.
So today, it is still the backbone of my entire desktop. After years of adjustment and adaptation, it gradually accepted its ugliness, and the robustness of the characteristics of the exercise I do not have to worry about. The so-called "strong buddies" are better than "hyper-fairies" anyway, "turn off the lights are the same" you all know. . .
The following are the dimensions of my desk and the layout of the device. The maximum length of this desk is long enough, and 2 meters of horizontal space is enough to place a large number of peripheral devices.
Desk supplements
The vertical distance of the desktop 60CM may be awkward when placing a long device. If you can increase the depth to 80CM and design an L-line corner on the right, the overall space utilization will be more perfect. This shortcoming was revealed when I abandoned the heavy-duty full-tower chassis and replaced the half-tower chassis. If the chassis is not deep enough on the desktop, it is extremely cramped. But if it is placed under the table, it is too small and appears a little abrupt, even makes people feel bad and kick. In the end I only had to customize a bracket to host the host.
Because the overall height of the cradle fits in nicely, a small UPS can be accommodated inside the cradle, which also counts as a single thing. The end result is perfect.
The whole is not too much, I am very satisfied with this.
The design of the desk was first used as a double. When I took the queen out of the country, the placement of the seat became a major obstacle for me. Especially when I replaced the large-size display, the placement of the speakers was very serious. conflict. For this reason, I had to install a partition bracket on the left side of the desktop to place the speakers.
When the books in the study are getting fewer and fewer, and there are more and more things, my nature is gradually exposed. The desk drawer with a functional desk design in the middle of the table has no use value except throwing some debris. However, many devices have no place to put, so I moved to customize the idea of ​​the equipment cabinet.
CAD high people please do not laugh at me, for amateur users Visio is a good thing. Although far from the standard of drawing standards, but at least the meaning can be expressed clearly.
A few days after I sent this drawing to the woodworking master, this cabinet came to my study. Highly refer to the host and the bracket as a whole, the color also chooses similar black. 
Placed on the right side of the desk, the Queen used to fit in the empty seats.
There are three layers in the cabinet. Each layer has a cooling hole at the rear. If necessary, an exhaust fan can also be installed. However, this requirement is not found after actual use.
One, two, two layers are mainly placed on network storage devices and network storage devices. Of course, due to the limitation of the width, the NAS can only be placed in a double bay. Therefore, I have to put four-bay NAS into the living room TV cabinet.
Inspired by the previous host tray, the lower floor continues to set aside space to accommodate UPS power to protect the network equipment in the cabinet.
After this tossing, my desk storage layout has basically taken shape. Although some are patched together, but also generally meet the needs, if you have the opportunity to design a new desk is to accumulate experience, will not be as white as the original .
Desktop display
The monitor has always been my most important peripheral device. After all, using a computer is to look at the screen. The quality of the display directly affects the mood. When I experienced a short-term single-screen monitor with a fish, I started a double-display tour.
The reason why I did not choose the stylish three-screen splicing is mainly because photography has gradually become my main interest. Image processing has become the primary task of the PC host, so dual-screen display is more suitable for this. The space limitation caused by the double desk seat is also a big reason why I can't splicate on three screens.
Display brackets and placement
For multi-screen displays, the monitor stand becomes a necessity. I did not use a more convenient high-end dual-arm bracket, and only configured a single-arm product for the secondary monitor. This is mainly due to cost considerations. Although the primary base of the primary monitor does not affect the position, it does not hurt. I can not bear the money. .
From the very beginning of the ThinkWise S100 to the later Ergotron LX, the functionality was not much upgraded. The more it was to pursue better workmanship and the so-called “Biggerâ€, and this piece was also my “Auntie Zhangâ€. The virgin was made.
In the beginning of dual-screen display, I still use the traditional master-detail side-by-side placement mode, and the secondary screen is mainly used to display the contents of a picture directory or a tutorial document.
One day he suddenly fell in love with this alternative layout after he had tried a master-deputy vertical placement mode. Because the original layout causes the edge of the secondary monitor to extend out of the desktop.
The main horizontal-vertical vertical layout can greatly reduce the area. Although the vertical display of the sub-display is slightly increased in height, the upper content needs to be looked up slightly, but it takes a few days to adapt.
At the same time, the advantages of this mode when browsing the web and editing vertical pictures are unparalleled, which is exactly the functional complement of the main display.
From then on, it became the standard layout of the monitor on my desk.
monitor
The monitor may be my most frequently replaced desktop peripheral and will be replaced within 1-2 years. For the history of their tossing, there is not much to say here, and interested friends can browse this list.
Currently used model DELL U2715H (main) + DELL U2515H (deputy), choose these two also for cost considerations, although DELL quality is not top notch but enough for everyday use, SRGB color gamut is also sufficient for daily photography retouching need.
The most important thing is that the color difference control of similar models of the same brand is more convenient. Of course, due to the difference in dot size, two separate color corrections must use different parameters.
The problem of light leakage that plagued many DELL monitors was very lucky to have not happened to me, but to be honest I am currently observing the quality of DELL is also slowly increasing.
Audio output
decoder
To be honest, I'm considered a "loaded offender" for audio products. It has always been a lack of an independent sound card in the computer. And when SONY UDA-1 this exquisite showy gadget was released, it made me interested and then started. After that, I also tried higher-end devices such as the TEAC UD-503 and benchmark dac1. But if I don't hear much difference in this kind of "argus-loaded compulsive offense", it will be the UDA-1 that will eventually accompany me.
Overall, I was satisfied with the UDA-1. The exquisite design and workmanship that best suits my taste, stable performance and comprehensive input and output interfaces, as well as many functions such as successful placement, amp, DSD decoding, etc. also make it a A very competent desktop media center. Because I'm not particularly fond of audio, I don't plan to invest too much in it. I don't want a lot of audio equipment to occupy my desk, so it becomes my best choice.
People often criticize its sound quality and thrust, but the experience I used in the past three years is not as bad as some rumors say, at least at the same price point is a good choice. After a few rounds of price reductions, the price/performance ratio has become very prominent.
Speakers
I tried a variety of collocations for the matching of speakers, but as my interest changed, I gradually changed from an entertainment mode focusing on video games to a video occasionally based on music playing, so I was more inclined to a simple and refreshing 2.0 sound. Road combination. Currently using the innovative EMU XM7 passive bookshelf speakers.
UDA-1 comes with a dual-channel amplifier unit rated output power 23W +23W. The weak thrust basically misses the middle and high-end passive speakers, which is also where many users concentrate Tucao.
However, the mix of EMU XM7 is very satisfying, and there is no lack of thrust in the sense of hearing. EMU XM7 is not a pure monitor speaker. It has inherited the innovative features of the innovative products, and it also makes the final sound is not a glass of white water. Its sound quality is also worth noting, especially the light music playing time is clear and the treble clear is my favorite style.
Although the 5-inch woofer configuration is somewhat bloated in size, it also takes into account video playback needs. For me, such a "loaded offender" on the one hand highlights the most balanced taste of other products.
headset
I really don't like headphones. It's always awkward to have a huge earmuff on my head. But at some point I have to use it. What are the occasions? You all know! ! ! !
Although the UDA-1 integrated amp unit can push a 300 ohm impedance headset, it has also been criticized as "white waste." However, I chose Beyerdynamic's DT990 Pro for direct use due to my lack of convenience. The impedance of 250 ohms is still somewhat surplus to UDA-1's nominal thrust.
Although the effect is certainly not as good as professional amp effects, but the actual use is not too much of a defect, the sound quality performance can reach at least 85% of the DT990PRO level, for daily applications is sufficient.
Keyboard mouse peripherals
Because it is not a fever game player, I pay more attention to the use of the peripherals and match personality. Especially the keyboard, the combination of favorite colors and key caps is undoubtedly the most dazzling highlight on the desk.
FILCO 87 The ninth generation of Ninja's sacred hands must be familiar with mechanical keyboard users. There is no doubt about the design and workmanship, but the price is always high. But for many players this is also the equipment that will eventually be purchased. After all, it is a tool to be touched every day.
For reasons of usage habits and endurance, I chose the black black shaft version. Compared to the overpriced white version, the black 87 keyboard is quite affordable and respectable. It also has stronger dirt and aging resistance. The black shaft is my favorite shaft body, straight up and down the full elasticity, the bottom of a crisp rebound quickly, and other shafts are always felt not enough "with strength."
The keycap uses a combination of gray and white colors as the main component and RGB function keys. The color matching is a matter of opinion. At least I'm very satisfied with it so far.
In order to keep clean, the customized Acrylic keyboard cover on the Internet is also very satisfactory, and the size is right to effectively prevent the ash when idle. 
For the mouse, I'm far less picky than the keyboard. For me, moving the mouse with a crisp, smooth button is a good mouse. So Logitech G502 is my favorite, especially the crisp left and right keys make me unable to stop. From the first regular edition to the later RGB edition, I would like to continue to use this model as long as I do not stop production.
As for many users who spit on the long-term use of micro-motion will double-click the problem I am basically ignoring, really want to repair the warranty can not repair on the replacement it, who told me to like this feel it, carrying a special offer more than one chant 
I prefer to use a mouse pad, which is smooth and comfortable to use. I don't feel cold in winter, so I'm using the ARTISAN/Swordcraft Blade B mouse pad with the G502.
Good handling, slippery feeling is also very delicate, but only the price is too expensive cost is not high, and durability is very general, the use of six months has more serious signs of wear and tear, so here is not particularly recommended, we each take Need it.
When I entered the most prosperous peripherals, I also equipped a Logitech G13 game controller.
Originally, it was hoped that shortcut keys could be adapted to Lightroom and PhotoShop. At the same time, the joystick could be used to fine-tune the slider to increase the efficiency of processing images.
But in fact, the accuracy of the joystick is almost unbearable for the fine-tuning of the retouching, and the combination of shortcut keys also makes me rush. In the end, it was found that my mouse's full screen chaos was most suitable to my habits, and G13-like devices may be more suitable for games.
Card reader
Some things feel that the price is quite expensive, and the price/performance ratio is barely, but once you see it, you never forget it. Until you buy it, you will be satisfied. Lexar Professional Workflow is this for me.
All memory cards currently have the corresponding module support. If a new specification memory card appears in the future, Lexar will update the corresponding module.
Users can choose their own modules for combination according to their actual needs.
It is worth mentioning that each reader module can also be used independently and its performance is quite good.
In terms of transmission interface, Professional Workflow HR1 framework supports USB3.0 connection
If for the pure card reader function, Lexar Professional Workflow is an absolute devaluation goods! It is structurally a simple USB HUB+USB card reader set.
As far as performance and practicality are concerned, Professional Workflow can basically do 100 or more readers.
However, these can be integrated into one, and the time modular combination, the design is still quite attractive.
So I can only say something like it. . Just bought it. . . . What life is, if you think about practicality and cost-effectiveness, it will be so boring.
Computer equipment
Hosts
At present, this console has been used for nearly two years, and it has not changed much except for the replacement of GTX1070, which was used as the “Aunt Zhang†measure. The performance of the E3-1230 V3 is basically sufficient. I will continue to use it for more than two years. I think that when I upgrade the system again, it should be time for the non-volatile memory to become popular.
With the increase of age, it is no longer interested in the competition of performance, so it is good to use hardware. And more emphasis on the overall structure of the compact and quiet.
This is exactly the advantage of this set of hosts that I am most satisfied with. The design of the Lianli PC-V700 chassis is reasonable, and it achieves a relatively small size while taking into account both the ATX full-size motherboard and the extended graphics card. At the same time disassembly and maintenance will not make people feel inconvenience, with Corsair RM650 power is perfect.
Although the thermal performance is not outstanding, but now the PC hardware is not so exaggerated before the heat, in fact, outside the hottest days of the summer I have to pull the CPU fan completely passive cooling. Since most of me use only software such as LR PS for image processing, the overall load is not large, and the power supply and graphics fan do not seem to have rotated several times. Together with pure SSD storage, the entire machine's silent performance is my most satisfactory advantage.
Network Storage
Due to the sensitivity to noise, the main NAS in the four-bay space was only placed in my study room for a few days and was placed in the TV cabinet of the living room. I was not worried about it and I was noisy outside the library! In the study, the finished NAS had only one dual-bay QNAP TS-251. Two 2T low-speed hard disks were configured to download and back up some of the data. The door closed completely inaudible sound, as for heat, anyway, more than 2 years it still lives well. . .
Jingdong TS-251's selling price is high, and it can be won if there are actual activities or Haitao 2000 or so.
In addition to the conventional finished NAS, I also have a DIY NAS. This NAS has been far more frequent than the main PC after I have tossed and upgraded for many years.
Rough look configuration is actually an ordinary ITX architecture small host, the only feature is the installation of a huge upright passive radiator, only rely on low-speed chassis fan cooling the whole machine to meet my almost demanding quiet requirements.
But seeing the memory collocation is a bit special. As you can see, this is a pure SSD NAS system (the HDD in the lower right corner is for the TS-251).
In fact, it was my long-cherished desire to equip a pure SSD NAS system. As early as the end of 2013, I began my first attempt, but due to the high SSD prices and immature network technologies at that time, the ultimate performance was only point-to-point. The full speed of single Gigabit transmission is stable. Due to the poor popularity of the WIN8 system at the time, and the limitations of port aggregation technology, it was impossible to obtain higher bandwidth. However, due to the high cost and poor versatility of transmission methods such as 10-Gigabit optical fiber and Infiniband NIC, the bandwidth was poor. Has also not been the motivation to try.
(The port aggregation can only increase the data transmission bandwidth of the server when multiple clients access at the same time, and cannot exceed the 1 Gbps bandwidth limit for single client point-to-point transmission.)
When WIN10 became popular, the multi-channel features of the SMB3.0 network finally made my dreams come true. The back of the host computer could show its uniqueness. Five Gigabit Ethernet ports, including the integrated network card on the motherboard, were built for me. A data transmission channel of up to 5Gbps has been reached, which is close to the limit bandwidth standard of SATA3.
With the help of multi-port NICs with the SMB 3.0 multi-channel feature, it finally allows me to superimpose the bandwidth of all the network ports on the host in a very inexpensive and versatile way to achieve higher transmission performance.
The actual test can also see that the read/write speed of 400MB/S has reached the limit of the SATA interface for civilian SSD products. From then on, the network bandwidth will no longer be the bottleneck limiting me.
As for the actual effect of such a high transmission speed, I think that the pursuit of the limit is an otaku instinct.
The actual use of the transfer performance equivalent to the speed of the SSD interface also made me a lot more flexible. For example, the output buffer used for video editing is now placed on this NAS. Even I have already installed the STEAM content library on this NAS. On the other hand, it saves the occupation of the local hard disk and makes it more convenient for multiple clients to work together.
I will share a separate experience on this chapter. Here is a preview. Friends who are interested can pay attention to the “Home Networking System Building Experience Sharing Chapter 5†released later: Riding on the wings of SMB 3.0, use yours well. Multi-port network card
This use can only be regarded as an over-relative solution to the relatively stagnant period of domestic wired network technology and cannot be called perfect. The problem that comes with this is the dramatic increase in the number of switch network ports. In my current mode, the NAS and the host already use 10 network ports. In addition to the other network equipment in the study, after the streamlining and optimization, a 16-port switch is required to meet the demand.
Fortunately, SMB 3.0's multi-channel network transmission technology does not have special requirements for switching equipment, which is also its cost-effective advantages.
Any stable Gigabit switch can meet the demand, and it happened to see that there was a NETGEAR GS116 V2 16-port switch in the SMZDM offer, which was purchased.
If the 16 network lines are entangled like spider webs, I would not like to see them. For otaku who suffers from obsessive-compulsive disorder, there is no problem in spending more time. The final result must be like this! 
Conclusion
Almost all the equipment on this table has already been introduced. There was a theme for this activity: "Let the female ticket guess the price of digital products on your desktop~"
However, I think that this gold coin is basically out of touch with me. It's not the price that I dare not tell the Queen. It's that the old wife has no need to conceal her for so many years.
I used to do something similar to buy a keyboard for 1000 and report it back to 200. I thought that the concealment work was very good. Until there was a chat, the lady said lightly:
“In fact, I’ve known how much you bought those things, and your Taobao and JD.com accounts and passwords are automatically filled in the browser.â€
"If you want to buy these things, buy them. I don't care about you."
"Anyway, your payroll card must be handed to me. The salary bonus is not allowed. As for other incomes, I don't care anymore. You're better off buying and drinking mahjong than smoking and drinking."
Since then, I have worked harder because the extra bonus does not need to be handed in without taking the payroll card, and the photography and other private activities like shooting outside the restaurant are also more difficult. In short, continuing my interest is the greatest motivation.
I would also like to thank SMZDM for all the testing activities that have helped me to fulfill my dream of a lot of equipment. Thank you for the value of my original articles, thank you for helping me
I thank my wife for not supporting or opposing my various interests and hobbies, but I said that these are not simply for the show of love, I feel that blindly deception and resistance is not a long-lasting way. The mutual understanding and mutual assistance between couples and lovers is not enough. Keep a balance between personal and family relationships, and I am also working hard to achieve the dream that my wife wants to own her locker room.
For all of you, I want to say something to my heart, like our otaku is a really reliable man, all the spare energy and private money is spent on this table, and there is still a lot of thoughts.
This is the end of the sun bills, in order to dream the desktop and study the otaku to go home to get their own queen Queen! ! ! ! ! ! ! ! !
Solar Panel,Poly Solar Panel,Mono Solar Panel,Solar Panel For Power Stations
Fuzhou Mei Li Cheng Imp&Exp Co., Ltd , https://www.mlc-solar.com