Power battery recycling system

The reuse of power lithium battery refers to the intermediate link between the recycling of new energy vehicles and power lithium batteries. The power battery step is realized by disassembling, detecting and classifying the power battery after use. 30-60% cost reduction of power battery. In general, the standard for the retirement of power lithium batteries for new energy vehicles is that the battery capacity is less than 80%. If the remaining capacity is still 70-80%, the direct recycling of the battery is a great waste, and the power lithium battery is reused. The reduction in battery cost is especially important.

This article refers to the address: http://

It’s a good idea to describe the current power battery recycling market with “precautions”. In the next five years, the large-scale decommissioning of power batteries will be the peak of power battery recycling. How to industrialize the recycling of power batteries is also a difficult point in the industry.

"Power lithium battery recycling can not only be limited to a certain enterprise, it must face the entire industry, and promote the recycling work together with upstream and downstream enterprises. At the same time, we must consider the mechanism of power battery recycling." Director of Zhejiang Chaowei Chuangyuan Industrial Co., Ltd. Chang Sunxian said in a speech at the "4th China Renewable Resources Recycling Industry Conference".

Related companies actively deploy power battery recycling

Since its promotion in 2009, China's electric vehicles have been developed for seven years. With the strong support of the state, the explosion of new energy vehicles has increased in recent years. According to statistics from the China Association of Automobile Manufacturers, the sales volume of new energy vehicles in China reached 2016. 507,000, this year's market sales are expected to be around 800,000. The service life of power batteries is generally 5-8 years, which means that China's power batteries will enter a large-scale retirement period starting this year and next. By 2020, the cumulative scrap of China's automobile power batteries is expected to reach 200,000 tons. Scale, and with the development of new energy vehicles and the passage of time, the pressure of power recovery will become greater and greater.

Cao Hongbin, a researcher at the Institute of Process Engineering at the Chinese Academy of Sciences, said that electric vehicle batteries may be scrapped after three to five years of use. After the vehicle battery is decommissioned, if it is not recycled and disposed of, it will not only waste resources but also pollute the environment.

The process of reusing power batteries is generally to invalidate, disassemble, detect, and screen used batteries, and then re-use them. "But the power battery of the new energy vehicle is relatively large in volume and high in energy density, and the recycling process is dangerous. Since the power battery involves heavy metals, electrolytes and environmental problems, every step of the recycling and reuse of the power battery is It is important.

In addition, because the battery received by the recycling company includes various forms, sizes, specifications, and packaging forms, it is difficult to achieve large-scale mass disassembly and disassembly when the disassembly involves a variety of packaging fixtures. The status quo of large-scale implementation. Yu Hai, general manager of Hunan Bangpu Scrap Automobile Cycle Co., Ltd. said.

Although power battery recycling is difficult, the country has already introduced some support policies and layout pilot work. More and more companies have begun to set up the recycling of power batteries. In addition to Shenzhen GEM, Yanfeng Lithium and other professional power battery recycling companies, including BYD, Waterma, Guoxuan Hi-Tech, Ningde era, AVIC Lithium, BAK and other power battery companies, are in the field of power battery recycling The market layout was launched.

Urgent regulation of power battery recycling system

In the first phase of the promotion of new energy vehicles from 2008 to 2012, new energy vehicles sold less than 30,000 vehicles, and about 80% were buses. Usually, new energy vehicles will need to face the problem of replacing batteries in about 5 years. For high-frequency vehicles such as taxis and buses, the demand for power exchange may be shortened to three years. The market for new energy vehicles in China has been concentrated in 2015, so the large-scale wave of power exchange is expected to wait until after 2018.

"But even if the power battery has not been involved in large-scale decommissioning, the power battery ladder recycling related system must be completed in advance," said Sun Huajun, deputy director of BYD Battery. Because, once the power battery market enters the “decommissioning period”, these batteries will face a “displaced” situation.

There are still many problems in the current power battery recycling in China. First, there is no mandatory legal policy. Although the government has successively promulgated some policies and regulations, the regulations that actually implement the responsibilities and clarify the penalties are not.

Second, the industry is “more scattered”. There are many types of battery products, many production companies, many car companies, and scattered recycling companies. These problems are not conducive to the centralized recycling of power batteries;

Third, the channel is difficult and the market is not mature. Although the problem of power battery recycling is an urgent task, but because China's power battery has begun to enter the peak of recycling, so the previous market is not mature, SME supply channels become a problem.

“In addition, the cost and profitability issue is undoubtedly the main obstacle to battery recycling. The high cost of recycling process and low recycling value make many companies and capitals prohibitive, and the prices of cathode materials such as anode, lithium manganate and lithium iron phosphate are biased. Low, without the economic driving force of recycling, it is difficult to guarantee the recovery rate of power batteries and resources and environmental protection," said Zhang Tongzhu, senior engineer of the Automotive Standardization Research Institute of China Automotive Technology and Research Center.

He believes that the formation of scale effect is an important breakthrough point for the current power battery recycling. It is urgent to establish a power battery recycling system and industry alliance. For the industry, it is conducive to the formation of economies of scale, more concentrated and effective recycling.

Conducive to the overall development of the industry as well as resources and environmental protection. For the battery and the vehicle enterprise, it can solve the problem of recycling the battery itself, and does not need to establish an additional recycling mechanism to increase the operating cost of the enterprise.

Power Meter 2 Rates

Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.

Installing the batteries

Install 3.6V rechargeable Battcrics(NI-MH) . The purpose of the batteries is to store the total electricity and mcinory setting.

Resetting

If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,press the RESET button.

Display Mode

Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from one mode to the other, press the FUNCTION button.

Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutcs (2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours) and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will rc-caculatc. LCD on second line displays current power which ranges in 0.0W~9999W. LCD on third line displays the current electricity costs which ranges in 0.0cost~9999cost. It will keep on O.OOcost before setting rate without other figures.

Mode 2: l ime/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.

LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:0() again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000K WH 〜 9999KWII without other figures. LCD on third line displays''DAY''- "1 "will be showed on numerical part(thc other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untial the maximal cumulative time of 9999 days.

Mode 3: Time/Voltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V~9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ~9999HZ without other figures.

Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.

LCD on second line displays load current which ranges in 0.0000A~9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 1 .OOPF without other figures.

Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 clones. LCD on second line displays the miniinum power which ranges in 0.0W~9999W. LCD on third line displays character of "Lo" without other figures.

Mode 6: I,ime/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W~9999W. LCD on third line displays character of "Hi" without other figures.

Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line displays the"O VER LOAD" with booming noise to warn the users,( 60470643, 60469303,selectable choice)
Supplemental informations:
1: Except tt OVERLOAD , ' interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third line described in this intruction take section according to two black lines on LCD screen. Here it added fbr clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&''Down" are in no function under un-setting mode.
Backlight Mode:
Connect to AC power,backlight im mediately light,if not press any button,backlight will went off in 15 seconds.
When press any of the buttonsbacklight start light again. (Backlight only light when it connect to AC power,backlight cannot light if use battery)
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg O.OOCOST/KWH ),the rendered content begins moving up and down which means that the device has entered the setting mode. Then press FUNCTION button to change selection and press UP/DOWN to set what you want. (On pressing once, the figure after domical point will increase or decrease accordingly. On pressing and hold-on, figures after demical point will increase or decrease slowly in 2 seconds while figures change quickly when hold-on time exceeds 2 seconds. When hold-on time reaches 10 seconds or more, the figures after demical point will stop while the figures before demical point begin to increasing or decreasing.) After that, press FUNCTION fbr swithing, then press [UP'nd "DOWN" button again to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After setting all above, press COST to return to Mode7 or it will automatically return to Mode7 without any pressing after setting with data storage.

Power meter double rates, power meter two rates, cost rate socket, power meter cost rate, energy meter cost rate, cost socket, cost plug

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com

Posted on