As we all know, industrial robots were first used in the automobile manufacturing industry. Robot technology has developed to the present, and the application range is so wide. The automobile industry is still an industry with high density of industrial robots. Compared with the welding, spraying and handling work in the automobile production process, the precision required by the PCB industry is higher, and the work complexity is relatively high. Here are some examples of three industrial robots used in the PCB industry.
1. SCARA robot is applied to circuit board coil detection process
At present, there is almost no complete testing equipment for short-circuiting of multi-layer coils on the market. Most of this work relies on manual completion. The PCB board with large aperture is manually placed on the detection device and then turned on for device detection. The PCB board with small aperture is small. It is necessary to manually hold the device (probe) to detect each coil. Using the SCARA robot, the loading and unloading and alignment of the matching inspection equipment can be completed, and all the coils of the aperture plate can be detected at one time. For the small aperture plate, the SCARA device is used to perform the fixed probe. The use is determined by using the probe for each one. The coil is tested and our equipment is also effective in avoiding manual inspections due to small apertures or large apertures. Compared with manual operation, the detection efficiency can be significantly improved, and the quality problems caused by missed inspection can be avoided.
2.DELTA robot is applied to the small box production process
At present, FPC loading work is generally done by using one by one and put it into the plastic tray. Because FPC is soft and thin, it is very inconvenient, even if experienced workers do this work very inefficient, Delta800 plus The previous vision system can be selected from the messy FPC stack and placed in the blister tray as required, the effect is not inferior to manual. It can reach 60 pieces/min, which can replace the manual sorting and loading, which saves valuable labor resources and reduces the cost of the enterprise.
3.6 axis industrial robot applied to AOI inspection process
Traditional AOI scanning machines rely on manual imitation, piracy and closing. A worker watches two scanning machines and repeats this monotonous work every day. The newly made circuit board also emits a pungent smell. Inflicting certain damage on the human body, the infrared light emitted by the AOI scanning machine is also an invisible killer, which is harmful to the health of workers. The multi-joint robot is used instead of manually responsible for the boarding, turning and receiving of two AOIs. Board, each class can complete more than 700 pieces of PCB hard board retractable, the overall efficiency can reach 1 / min (including AOI machine scanning time). In the future, if the loading and unloading transport line that cooperates with the retractable board machine can be further connected to the AGV for fixed line transfer, the fully automated production of the upper and lower processes can be realized.
With its high degree of automation, industrial robots are increasingly being used on industrial production lines. With the continuous innovation of industrial robot technology, robots can also ensure high precision in high-speed production, which makes robots Make a difference in the PCB industry.
IE2 Standard motor is totally enclosed and fan cooled 3 phase squirrel cage induction motor. It is newly designed in conformity with the relevant rules of IEC&DIN42673 standards.
Application:
IE2 Standard 3 phase motors are widely used as driving equipments of various machineries such as: machine tools, blowers, pumps, compressors, transporters, agricultural and food processing
Operating Condition:
Ambient temperature: -15°c to 40 °c
Altitude: ≤1000m
Rated voltage: 380V, 400V, 415V, 220V, 230V, 240V, etc
Rated frequency: 50HZ, 60HZ, 50HZ/60HZ
Duty: Continuous(S1)
Insulation class: Class B, Class F
Protection class: IP44, IP54, IP55
Cooling method: IC0141
Note:
The voltage and frequency could be made according to your request. If there is any requirements or inquiries, welcome to contact us.
IE2 Standard High Efficiency Three Phase Induction Motor
IE2 Induction Motor,Standard Induction Motor,High Efficiency Induction Motor,Three Phase Induction Motor
FUZHOU LANDTOP CO., LTD , https://www.landtopcos.com