Adaptive zero-voltage switching electronic ballast - power supply circuit - Circuit Diagram

Testing probe for current and voltage pins with dimensions 420x4450 mm and a head diameter of 5.0 mm. This probe can handle overcurrent situations and is ideal for voltage and current pins.

Brand AVX TPSE226M035R0125 low impedance tantalum capacitor from AVX. This capacitor has a rating of 22uF and is known for its excellent performance under low impedance conditions.

Crystal oscillator designed for electronic scales, measuring 3.2x2.5mm (3225 size). It operates at 16 MHz (16.000 MHz) with a load capacitance of 12 PF and temperature stability options of ±10 ppm, ±20 ppm, and ±30 ppm.

MOS power ICs suitable for a wide range of applications, providing efficient power conversion and management.

Photocouplers used for isolating electrical signals between circuits, ensuring safety and reducing noise interference.

Adaptive zero-voltage switching circuit schematic for electronic ballasts.

The IR2520 is primarily designed to drive fluorescent lamps with a power rating below 40W. Depending on the specific wattage of the lamp, component parameters like Q1, Q2, L2, and C7 need slight adjustments. For instance, when the lamp's rated power falls within the range of 16-28W, Q1 and Q2 should be 500V, 2A MOSFETs (like the IRFC420). The inductance value of L2 should be approximately 1.8mH to 3.5mH, while the capacitance of C7 typically ranges between 3.3nF and 5.6nF. As the lamp's power increases, the inductance value of L2 decreases accordingly. Fine-tuning these components during the debugging process ensures that the lamp current aligns closely with or meets the lamp's rated current requirements.

Additional notes: In the design of electronic ballasts, selecting appropriate components is crucial for optimizing performance and efficiency. The IR2520 driver, for example, offers adaptive zero-voltage switching capabilities, which significantly improve energy efficiency and reduce electromagnetic interference. Furthermore, the selection of capacitors and inductors plays a critical role in maintaining stable operation under varying load conditions. Proper tuning of these components not only ensures compliance with industry standards but also extends the lifespan of the ballast system.

RF Connector

SMA RF Connector RF11007JPG,smc rf connector RF11007JPG,Mini RF Connector RF11007JPG

Wenzhou Hesheng Electronic Co., Ltd. , https://www.heshengelec.com