design 
The titanium LED Heat Sink is hidden in the bulb-brushed bulb and has a similar shape to the LED bulbs commonly found on the market.
The 9 watt power supply provides 800 lumens of light output (measured at 835), s efficiency is sufficient to meet more than 90 lumens per watt, dimmable, from maximum brightness to 3.8% brightness, and comes with a 3-year warranty.
However, compared with the OSW equivalent 60W Ultra LED bulb in the above table, the Ultra LED bulb is priced at $4 lower than the titanium LED, 8.5 watts at 8.5 watts, and the efficiency is more than 100 lumens per watt. It is divided into zeros and comes with a 5-year warranty. The only titanium LED that can beat the Ultra LED is the color rendering, 80 VS 78.
Titanium LEDs are dimmable, but the minimum brightness is not as good as OSRAM and is more flicker than CREE 's 4Flow LED bulbs. More importantly, the price of 4Flow is only a little higher than half of that of titanium LED. Considering the price, the price of IKEA Ledare LED is even more shocking, only $5.
performance
Titanium LEDs have a satisfactory warm color temperature of 2700K and other color temperatures to choose from, including the 2400K near the red end of the spectrum and the whiter 4000K version.
The omnidirectional light output is also satisfactory and can be used as a bedside reading light, but a small amount of flicker is found at the lowest level of brightness during dimming.
Final judgment
Advantages: Bright, efficient, and dimming performance is quite good.
Weakness: The price is $14, which is more expensive than many similar products.
Synthesis: The product itself performs very well, but the price makes it difficult to beat the competition.
All in all, the green creative titanium LED provides strong performance in all aspects and stable performance. The price of $14 was a fairly fair price last year, compared to such a mature LED bulb, but the lighting market is changing too fast. There are a lot of products on the market that sell for $10 or less with the same high performance, and can only look forward to the upcoming high CRI version of cloud LEDs.
Stamping is the production technology of product parts with the help of conventional or special stamping equipment, so that the Sheet Metal is directly subjected to deformation force and deformation in the die, so as to obtain a certain shape, size and performance of the product parts. Sheet metal, die and equipment are the three elements of stamping.
Metal Stamping,Stamping Process,Oem Heat Sink,Stamping Power Box
Dongguan Formal Precision Metal Parts Co,. Ltd , https://www.formalmetal.com