Vertical shrinkage deformation instrument use method - Database & Sql Blog Articles

Probe domestic double-head probe 038-BB-5.7L The shape of the two ends of the needle is outside the pointed needle

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Manufacturers supply LED lamp bead SMD LED 0805 yellow light super bright indicator light dedicated

Huaqiang Square crystal original spot stock

Product Name: Vertical Shrinkage Deformation Instrument

First, vertical shrinkage deformation instrument

Applicable to brick wall brick production plants, research institutes, universities, construction departments and other units to test sintered ordinary bricks, fly ash brick, and the amount of shrinkage and expansion deformation of the wall tiles.

Second, vertical shrinkage deformation instrument

Instructions:

1. Select the center height of the par you need, and place the left end of the par (such as the structure drawing) in the groove of the positioning post. The lower plane of the pars should be close to the datum of the base, then push the other end of the par slowly into the center of the instrument.

2. Loosen the set screw, insert the dial indicator into the adjustable column hole of your choice, so that the dial gauge probe is in contact with the right end of the par. Then tighten the set screw to position the dial indicator on the instrument and read the scale at this time.

3. The placement method of the test piece is the same as step 1.

4. For test piece production, maintenance, and shrinkage and expansion testing, follow standards such as GBJ5101-2003 and others.

This device is designed for precise measurement of dimensional changes in building materials during thermal or mechanical processes. It helps ensure quality control and compliance with industry standards. Whether used in laboratories or on-site, it provides accurate readings essential for material analysis and performance evaluation.