1 Scope of application
This code is applicable to the quality supervision and spot check of fixed general lighting products organized by national and provincial quality and technical supervision departments. The supervision and spot checks organized by other quality and technical supervision departments and for special situations can be implemented with reference to this specification. The contents of this specification include product classification, enterprise size division, inspection basis, sampling, inspection requirements, judgment principle and objection processing re-examination.
This specification is applicable to the supervision and inspection of fixed-type general-purpose lamps with tungsten lamp, solid-state light-emitting device, tubular fluorescent lamp and other discharge lamps as the light source with the power supply voltage not exceeding 1000V.
2 Product Categories
2.1 Product Classification and Code
2.2 Product Category
Fixed general-purpose lamps can be divided into hanging type, ceiling type, wall type and fixed floor type according to different installation forms.
3 Enterprise size division
According to the actual situation of the fixed general-purpose lighting products industry, the scale of production enterprises is divided into large, medium and small enterprises based on the annual sales of fixed general-purpose lighting products. See the table below:
4 Inspection basis
All subsequent amendments or revisions to the following documents are not applicable to this specification. For undated dates, the latest edition applies to this specification.
GB7000.10 "Safety requirements for fixed general-purpose lamps";
GB7000.1 "General Safety Requirements and Tests for Luminaires";
GB17743 "Limitations and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment";
GB17625.1 "Electromagnetic compatibility limit harmonic current emission limit (device input current per phase ≤ 16A)";
GB/T15482 "Product quality supervision small overall count once sampling inspection procedures and sampling tables".
The State Administration of Quality Supervision, Inspection and Quarantine, No. 13
Recorded current effective corporate standards and product quality requirements
5 sampling
5.1 Sampling model or specification
Each company draws a representative sample.
5.2 Sampling methods, cardinality and quantity
Products that have passed the inspection of the enterprise or have been qualified in any way are randomly selected in the finished product warehouse of the enterprise or in the market. When sampling the enterprise finished product warehouse, the sampling base is not less than 10 units, and a total of 2 samples are taken, one of which is used as the inspection sample, and one of which is sealed as the standby sample. When sampling in the market, the sampling base can satisfy the sampling quantity, and the extraction method and quantity requirements are the same as those in the enterprise finished product sampling.
5.3 Sample Disposal
The sample taken is packaged according to the transportation conditions, and the “Product Quality Supervision and Inspection Seal List†is attached to all possible openings on the package. The sample to be taken should not be stressed, damp, rain, exposed to the sun during transportation and storage, or placed together with oil and acid, alkali and other corrosive substances.
5.4 Sample list
The sample list should be filled in accordance with relevant regulations, and the products to be inspected and the relevant information of the enterprise should be recorded. At the same time, the total sales of fixed general-purpose lighting products produced by the company in the previous year were recorded in 10,000 yuan. If the sampled company did not produce such products in the previous year, record the total sales of such products actually produced during the year.
1 2 Next Page
In the outdoor lighting section, the global urban transformation, urban construction, residential construction and road construction for market demand of high-power, high-brightness, energy-saving LED driver power supply is extremely large. Isolated Programmable LED Driver no need of Optocoupler and side current control circuit to realize isolating constant-current output. The circuit structure is very simple.
The advantage of MOSO isolated programmable Industrial Light LED Driver is small
input/output capacitance, small output wave, isolated output, high power
factor, high current precision and high reliability. Fixed output Industrial Light power supply has output open-circuit
protection, over-voltage protection and short-circuit protection.
Dimmable Industrial Light LED Driver built in 2-in-1 dimming and auto-react:0-10Vdc, PWM signal, dali control is optional.
Architecture and industrial Light LED Driver adopt Soft-switching patented technology, high efficiency up to 93%.
Programmable High Bay LED Driver
Programmable High Bay LED Driver, Isolated Programmable LED Driver,Programmable LED Driver,Programmable High Bay Light LED Driver
Moso Electronics , http://www.mosoleddriver.com