Toronto's Palace Pier waterfront residential area has become Canada's (and even North America) first residential building with LED technology for interior lighting, and this is only part of the $2.4 million internal corridor innovation project.
Jim Lord, Chairman of the Board of Directors of the Palace Palace in Toronto, said: “This is the largest residential area in Canada and even North America that uses LED technology. Our board and residents have been looking for solutions for new green lighting. Now we find that LED lighting is exactly The answer we want."
The project uses MR16 luminaires consisting of nearly 1,300 LEDs on each of the 44 floors of each corridor. Compared to the traditional 35 watt halogen MR16 lamps, Canadian CRS Electronics offers LED lights of only 4 watts.
CRS's LED MR16 lamp can maintain 70% of luminous flux after 40,000 hours of continuous use, which is equivalent to 5 years of continuous use. Compared to the 35-watt halogen lamp instead of the replacement, the LED MR16 lamp consumes 87% less energy and saves approximately $40,000 per year for the Palace residents. Electricity demand is reduced by 40 kilowatts, and the total annual electricity consumption is 349,226 degrees, equivalent to a reduction of 110 tons of greenhouse gas emissions. Moreover, the life of the halogen lamp is 2000 hours, while the MR16 lamp is 40,000 hours, which greatly reduces the maintenance cost required for the purchase of the lamp and the worker's work. Therefore, considering the issue of saving energy and maintenance costs, the cost will be recovered after 9 months of purchase.
? Toshiba Leading launched LED bedside lamp this month (... 2008-01-14
? South Korea developed a cyan laser light source called more than LED (Figure... 2008-01-14
ITC to investigate patent disputes between Seoul Semiconductor and Nichia 2008-01-14
? China's energy-saving lamps started the Argentina energy-saving campaign (Figure) 2008-01-11
EU issued a warning to China's sunflower festival lights (Photo) 2008-01-10
? Seoul Semiconductor suffered a lawsuit against Nichia 2008-01-10
1
The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.
Material characteristics
1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.
2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.
3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.
4. The lamp frame is made of high quality stainless steel.
5. Fasteners bolts and nuts are stainless steel.
6. Light source:400W-1000W sodium lamp.
Specifications:
Height: from 18m to 50 m
Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.
Shape: round, multi-pyramidal, column form, polygonal or conical
Material:
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
Tolerance of Dimension: ±2%
Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²
Light plate: Various figure of selection ,material with hot dip galvanization steel frame
Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut
Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode
Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles: Insert mode, inner flange mode, face to face joint mode .
Design of pole: Against earthquake of 8 grade
Wind Speed: 80 Km/Hour
Welding: We has past flaw testing. Internal and external double welding makes the welding in shape
Thickness: 6 mm to 20 mm
Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging
Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required
High-Mast Lamps Series,High Mast Lamps,High Mast Light,High Mast Light Pole
Jiangsu chengxu Electric Group Co., Ltd , http://www.chengxulighting.com